Mother of Pearl Grey Square

Original price was: £9.80.Current price is: £4.00.

1000 in stock

Mother of Pearl Grey Square

Mother of Pearl Grey Square is made from natural shell and is a really stylish option for your bathroom or kitchen. They have square grey shell pieces and can be cut down to create borders to accentuate a plain base tile but also look great when used as a feature wall which really catches the eye.

Natural shell pieces
Use as a feature wall or cut into border strips
Shades of natural grey
300mm x 300mm sheet
11.1 Sheets per Sq.Mtr (Approx.)

Original price was: £9.80.Current price is: £4.00.

1000 in stock

Share your love

Additional information

Colour

Grey

Colour Range

Greys

Material

Natural Shell

StockCode

MQ20004R14

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

BROWSE ONLINE &
PURCHASE IN STORE
Know what you're looking for? browse and select your favourites on our website – then make a visit to your local Tile&BathCo showroom, our friendly staff will help you complete your order.
PURCHASE ONLINE &
HOME DELIVER
You’ve done your homework, and have an idea what your looking for, browse our site and add to your basket as you find what you need. Complete your order, and have your order delivered directly to your door.
PURCHASE ONLINE &
COLLECT IN STORE
Know exactly what your looking for, use our search tool to find the product name or stock code, add to your basket, and choose to to collect from store. Our friendly staff will help load your order, and check if you've missed anything from your order.
IN-STORE AND ONLINE HELP:
ASK A QUESTION
Know what you're looking for? browse and select your favourites on our website – then make a visit to your local Tile&BathCo showroom, our friendly staff will help you complete your order.
VISIT A
SHOWROOM
Know exactly what your looking for, use our search tool to find the product name or stock code, add to your basket, and choose to to collect from store. Our friendly staff will help load your order, and check if you've missed anything from your order.

ProClean Grout Haze Remover

UltraTile Grout Haze Remover effortlessly removes residues such as mortar and cement grout, efflorescence, encrusted and engrained dirt, as well as natural calcium and limescale deposits.

  1. Always perform a test in an inconspicuous area on-site to check suitability of product, prior to use - read these instructions fully before application.
  2. Dependent on degree of contamination, Grout Haze Remover can be used neat or diluted up to 1:10 with clean water.
  3. Pre-wet the surface, apply generously and allow the product to dwell for a few minutes before agitating and rinsing off with plenty of clean water.
  4. Repeat the process if necessary. If using Grout Haze Remover indoors ensure good ventilation during and after use.

ProClean Tile & Grout Sealer

UltraTile Tile & Grout Sealer is a premium, non flammable impregnating sealant that offers excellent stain protection against oil and water spills with a low odour, UV stable, colourless and nonyellowing appearance.

Tile and Grout Sealer can be applied to damp stone and grout immediately after installation with this fast track formula. It penetrates to protect all types of natural stone surfaces, i.e. travertine, terracotta, limestone, marble, granite, sandstone and many other porous stone surfaces such as plain or exposed aggregate concrete, slate, concrete pavers etc.

DIRECTIONS FOR USE

  1. Always perform a test in an inconspicuous area on-site to check suitability of product, prior to use - read these instructions fully before application. If you experience difficulties using this product, please contact our technical support team on the number above.
  2. Use without thinning down. Surfaces should be clean, dry & free from oil, grease, dust, and any other debris. Do not apply in temperatures below 5°C or above 25°C and should not be subjected to extremes of temperature until completely dry.
  3. Apply a generous, even coat of Tile and Grout Sealer to the surface and edges of the stone using a roller, sponge, lint free cloth or brush. Ensure even distribution by wiping over several times, remove any surface sealer that has not penetrated the tile or stone after 15-20 minutes.
  4. Apply a second coat, allowing a minimum of 30-45 minutes drying between coats, repeat the process and remove any excess sealer from the applied area with a dry lint free cloth. It will take up to 24 hours before the product will offer full protection. Until this has happened, keep the surface free from water and oil spills, as stains may occur before fully cured.

You may also like…