UltraTile Grout Haze Remover effortlessly removes residues such as mortar and cement grout, efflorescence, encrusted and engrained dirt, as well as natural calcium & limescale deposits.
Use indoors and outdoors after the installation process, it is suitable for all acid-resistant surfaces, including ceramic tiles, porcelain, brick, clay and quarry tiles, terracotta, concrete and other types of natural stone.
Grout Haze Remover is not suitable for use with brushing sand grout or around acid-sensitive surfaces such as enamel, zinc, chrome, stainless steel, polished marble and limestone, etc.
DIRECTIONS FOR USE
- Always perform a test in an inconspicuous area on-site to check the suitability of the product, prior to use – read these instructions fully before application.
- Depending on the degree of contamination, Grout Haze Remover can be used neat or diluted up to 1:10 with clean water.
- Pre-wet the surface, apply generously and allow the product to dwell for a few minutes before agitating and rinsing off with plenty of clean water.
- Repeat the process if necessary. If using Grout Haze Remover